Representative ENCE GmbH in Moscow

The representative ENCE GmbH in Moscow specializes in research and development of energy-saving and high efficient solutions, supplies processing lines and plants on the turn-key basis in oil and gas, petrochemical, metallurgy and power industries.

ENCE GmbH representative was registered in 2002. To raise the status of Moscow representative and demonstrate ENCE GmbH long-term plans in Russia the company has bought an office in the place of registration.

industry innovations, modernization, energy saving, process environment

Address: Representative ENCE GmbH in Moscow Russia
105082, Moscow, Malaya Pochtovaya str. 10
Tel: +7(499)261-07-21
Fax: +7(499)263-13-37
E-Mail: info@ence.ch
Commercial director: Mr. Sergey V.Uvarov

Besides, two branches and service centers of the company have been opened in Moscow to expand commercial business of ENCE GmbH / Switzerland.

Address: OOO "INTECH GmbH"
Russia, 105082, Moscow, Malaya Pochtovaya str.10
Tel: +7(499)261-08-45
Fax: +7(499)263-14-38
E-Mail: info@intech-gmbh.ru
Web-site: www.intech-gmbh.ru
General Director: Mr. Vladimir V. Eremin

Address: OOO "ENCE"
Legal address: Russia, 129347, Moscow, Kholmogorskaya str. 2, bld. 2, str.2
Correspondence address: Russia, 105082, Moscow, Malaya Pochtovaya str.10
Tel: +7(499)261-07-21
Fax: +7(499)263-13-37
E-Mail: info@ence.ch
Commercial director: Mr. Sergey V.Uvarov

ENCE GMBH in Moscow is the company’s largest representative and it employs about 60-80 people on a constant basis.

The staff of the representative office is divided into several subdivisions for the organization of systematic work and for saving from overlapping of activities. Here they are:

Representative ENCE GmbH chief engineer department

The department consists of innovation and IT advertisement department and complex projects department.

ENCE GmbH innovation and IT advertisement department

The department specialists provide information and IT support for all online advertising resources in domain zone .ru. They constantly add the sites with information about new developments and equipment, supplied by ENCE GmbH to the sites. Besides, the main function of the department is the information support of the innovation and energy-saving projects, designed by ENCE GmbH.

The specialist of the department can provide the exhaustive information; organize delivery and installation on a turn-key basis with attraction of the local service companies in Moscow of the following projects:

One of the real breakthrough innovations for a wide range of different applications in industry and everyday life shall become the power plants based on energy units. This is a high-technology, environmentally friendly power generator with high efficiency and minimum labor costs within the long lifetime. These power plants can be efficiently used as:
- power generator in hard-to-get-at places for pipeline actuators, camps, rebroadcasting towers of telecommunication and mobile networks
- one of the variants of utilization of associated petrol gas (APG), using electric power and heat immediately at the deposits and camps at sites
- environmentally friendly alternative energy source in housing settlements, for facilities requiring secured power supply such as hospitals, administrative buildings, information centers, etc.
- auxiliary power generator at the industrial facilities and objects on low electric power supply or with periodical peak loads
- portable power generator for emergency response team and EMERCOM
Even more revolutionary is the innovative project, already industrially applied, on using the combustion heat of associated petrol gas (APG) in external combustion electric plants. Unlike the power plants based on energy units these plants can operate without preliminary treatment of APG with high content of sulfides and other impurities. These plants have already found industrial application in Sweden, Norway and the USA and can be successfully implemented in Russia.

Moreover the specialist of the department deliver other industrial plants related to energy security of the objects using 800 kW uninterruptible power supplies, multivators, rectifiers, AC frequency converters

ENCE GmbH complex projects department

The specialists of the department are willing to work at the questionnaires and technical specification together with the customer and offer different variants of optimal solution for the complex project considering modern technologies and equipment on the basis of energy-saving solutions and innovations.

ENCE GmbH Moscow representative chemical industry department and petrochemical industry department

The specialist of the departments deal with solving the customers’ local tasks on production upgrading, worn-out or off-market equipment replacement with modern one in compliance with the latest requirements of modern industry. Besides, ENCE GmbH has partnership relations with a number of manufacturing companies from Europe, the USA and Japan based on the long-term cooperation agreements. Thus we can provide you with favorable offer on supply of the whole range of different equipment:

A wide range of pumping units for different applications and media:

High-Tech Leak-proof Teikoku Pumps (Japan), used for pumping high-aggressive and toxic liquids and suspensions.

Flow rate: Up to 2400 m³/h
Head: Up to 750 m
Pumped medium temperature: from -200 to +450°C
Explosion protection acc. to ATEX

Corrosion Resistant Centrifugal Apollo Pumps (Germany):

Types of construction:

Horizontal and vertical centrifugal
Horizontal and vertical multistage high-pressure
Leakproof pumps with magnetic couplings
Inline horizontal and vertical
Semi-submersible vertical
Self-priming pumps
Propeller-type pumps

Flow rate: up to 7000 m³/h
Head: up to 2500 m

Corrosion Resistant Centrifugal Pumps Shin Nippon Machinery for extreme application conditions

Operating data:
Flow rate: up to 11320 m³/h
Operating pressure: up to 420 bar

Mitsubishi Heavy Industries High Pressure Piston Pumps (Japan), FG 250-25/25 and spare parts, which are used in ammonia production sealing systems designed by the company TEC (Japan)

WEPUKO (Germany) high pressure piston pumps and complex units for aggressive and neutral media

Operating data:
Flow rate: up to 200 m³/h
Discharge pressure: up to 350 bar

Diaphragm and piston dosing pumps by Hauke (Germany)

Types of construction:

Plunger dosing pump with hand drive travel adjustment
Diaphragm dosing pump with diaphragm break indicator and electric heating
Three-head hydraulic stainless steel diaphragm dosing pump
Hydraulic PTFE diaphragm dosing pump with diaphragm break indicator
Two-head plunger dosing pump with hand drive travel adjustment, gland seal and lantern ring
Two-head hydraulic PTFE diaphragm dosing pump with diaphragm break indicator
Three-head plunger dosing pump with electric servomotor or manual drive adjustment

Specification:
Flow rate: from 0,25 to 70000 l/h

WOMA (Germany) water-jet high-pressure pumping systems used for process cleaning, working space and surface disinfection.

Process conditions:
Operating pressure: up to 7000 bar
Flow rate: up to 3070 l/min

Heat-Exchange and Capacitive Equipment, special design pipes, including offsets and pipe adaptors of different wall thickness from special materials and steels, Metal Structures.

Shell-and-tube heat exchangers:

Tube-bundle
Floating roof
U-tube
Rifled-tube

Operating data:

Nominal diameter: up to 6000 mm
Pressure up to 500 bar
Length: up to 65 m
Temperature: from -200 to +650°C
Weight: up to 250 t
Wall thickness: up to 130 mm

Various piped systems including the following:

Piped systems for process furnaces at distilleries (radiation and convection zones), incl. heat resistant centrifugally-cast pipe
Central heating station furnace pipe systems
Convection heater units
Electric power plant endpoint coolers

Capacitive Equipment and Specialized Process Equipment:

Electric power plant economizers
Petroleum processing electric dehydrator
Dehydration tanks
Molecular sieve absorber
Feed water reservoirs for electric power plants
Degasification units
Double shell vacuum reservoirs (reservoir-container, cryogenic gas generator)
Distillation towers
Rectification tower
Reactors
Water electrolysers
Absorbers
Extractors

Heavy Duty Polymeric Pipes and Fittings

Wide production range from DN15 (1/2") to DN600 (24"), according to standards DIN 2848 or ANSI B 16.5, operating temperature: -50° to +230° C

Pipes
Fittings of all sorts and nonstandard offsets
Pipe and reactor internal linings
Column back-up internal blocks
Manifolds and collectors

Technical Ceramics

Ceramic acid-resistant nozzles
Acid-resistant surfaces, bricks, blocs
Catalyst supports, adsorbents
Various-shape ceramics for cutting and crushing

Burners and thermal waste disposal systems (incinerators)

Incinerator application field is utilization of:

solid industrial and domestic household wastes
liquid wastes
hazardous biological wastes
oil sludge wastes
petrochemical manufacture wastes

Burners:

DUMAG ultrasonic burners for incineration of gaseous, liquid and solid wastes.

Technical data:
Burner power range: 1 to 130 MW
Power control range: 30% to 50%
Fuel type - gas, liquid, combined

Gas burners

slit burners, 0,2 –2,5 MW
round-flame burners, operation on crude gas, 0.4 MW to 8 MW
Multi-stage fuel supply and low NO_x0.5 burners, MW – 6 MW
Straight flame burners at alternating pressure in a system, 0.5 MW – 2.5 MW
Forced–draft burner with ultra-low NO_x emission level, 0.2 MW – 0.9 MW
Swirl and recycling flow burner, 0.5 MW – 5 MW
Round-flame forced draft burner with ultra-low NO_x emission level, 1 MW – 9 MW

Control and Instrumentation Equipment

More information

Smart pressure sensors
Photoelectric sensors
Flow sensor
Humidity and temperature sensors

Temperature meters
Electromagnetic flow meter
Converters
Detectors
Controllers
Regulating valves and positioners
Sensors

ENCE GmbH Moscow representative oil refining industry department

The specialists of the oil refining industry department find solutions for oil refineries upgrading, take part in modern equipment supply to new plants and replacement of old worn out equipment with modern analogues:

Gas Compressors, High-Pressure Pumps of SUNDSTRAND Corporation (Sundyne)

High-Speed Gas Compressors
Capacity: up to 17000 nm³/h
Max. operating pressure: up to 100 bar
Rotor speed: up to 50000 rpm

Single-stage centrifugal high-speed pumps
Capacity: up to 250 m³/h
Operating pressure: up to 200 bar

Rotary vane-type pumps for heavy high viscosity oil products

Operating data:
Capacity: up to 265 m³/h (higher – upon request)
Operating temperature: -30...+260°C
Operating pressure: up to 14 bar (50 bar upon request)
Medium viscosity: 2...75000 cSt

The pumps are used for transportation of:

Lubrication oils and its additives
Oil products (bitumen, flux oil, asphalt)
Consistent grease
Polymers and high-molecular alcohols
resins, varnishes and glues

Rotary twin-screw pumps for heavy oil products

Operating data:
Capacity: up to 1000 m³/h
Operating temperature: -40...+200°C
Operating pressure: up to 20 bar
Medium viscosity up to 7000 cSt

The pumps are used for transportation of:

Lubrication oils
Oil fuel (residual and distilled)
Liquid oil products
Bitumen/asphalt
Solvents
Plant oils
Glue, varnish, resins, paints, polymers
Palm oils
Fatty acids
Water (fresh and sea)

Steam Turbines Shin Nippon Machinery

Operating data:
Max. steam pressure: up to 67 bar
Max. temperature: up to 540°C
Max. power output: 50000 kW

Reverse circulation self-cleaning filters for oil and oil products filtration

Technical data:
Filter fineness: 25 µm
Life time: over 20 years
Material: SUS 304, SUS 316L, hastelloy

Vapor recovery units of volatile hydrocarbons

Application:

Loading terminals
Truck filling stations and truck tanks
Railway oil products loading terminals
Petrol station
Oil tank farms

Technical data:
Flow rate: 10 m³/h ... 30 000 m³/h
Required power (average annual): 0,08 kW.h/m³ ... 0,15 kW.h/m³
Recovery range: 97... 99,9% depending on vapour type
Allowable VRU constant overload: 150%, vapour recovery remains 90%

Oil desalting plants (electrodehydrators)

Max. salt content in oil at the plant outlet is 5 mg/l.

Automatic foam, water and gas fire-fighting systems

Fire-fighting systems types:

Gas fire-fighting systems
Foam fire-fighting systems
Water fire-fighting systems
Fire alarm system
Auxiliary facilities and components for fire-fighting systems

Leak proof oil products loading, unloading and transfer systems

Top loading stations
Marine loading arms (DN100 - DN400 up to PN 40)
Floating pump nozzles
Bottom loading stations
Liquefied gas unloading and loading systems
Leak proof tank car loading systems
Leak proof chemicals loading systems
Single-point loading units

Complete solutions in industrial wastewater treatment

Main utilized technologies:

Mechanical cleaning
Chemical cleaning
Pressure flotation
Membrane cleaning
Chemical reagent treating methods
Electrochemical neutralization
Ion-exchange treating methods
UV treatment
Techniques based on surface active substances

Shutoff and Control, Safety Relief and Check Valves

Wedge Gates
Shutoff Valves
Safety Relief Valves
Check Valves
Butterfly Valves
Ball Valves
Gates
Two- and Three-Way Valves
Control Valves, etc.

ENCE GmbH Moscow representative gas production and processing department

The specialists of the department supply a wide range of special shut-off and control valves, certified by GASPROM:

Ball valves
Gate valves
Wedge gates
Check valves
Choke valves
Needle valves
Launcher and receiver pig valves

by such famous manufacturers as:

Breda Energia
Roforge
Cameron
Malbranque
Alco Valves
Piping Technologies

Besides, the specialists of the department can supply:

Well head equipment and X-mas tree

Complex plants

Skid

flare knockout drum
Gas treating capacities
Filtration/water treatment skid
Pipeline valve skid
Pressure relief skid
Pump skid
Gas skid for service application
Instrumental skid
Chemical spraying skid

Modules

Measuring equipment
Analyzers
Traps for pigs launching/receiving
High and low pressure knockout drums and plants
Dehydration capacities and systems
Test separators
Manifolds for producing, spraying and testing

Control systems

Control panels
Linear hydraulic/pneumatic drives

Gas Separators

of various capacity for gas and condensate well cleanup from condensed moisture and condensate

Turbine Expanders

Technical data:

Capacity: up to 60 MCMPD
Power: from 100 to 50000 kW
Inlet pressure: to 150 atm
Inlet temperature: from -196°C
Expander isoentropic efficiency coefficient: up to 90% (depending on condition combination)

Gas pipe fireless cutting units

Design features:

Cutting in any positions
From-start-to-end cutting process control
Process automatization is available
No vibration during operation
No thermal or mechanical impact on cut or broken edges
Big cutting depth
Possible unit application for cutting under water
Possible cutting of mixed materials by one cutting action
Almost noiseless operation

Gas Pipeline Cleaning Systems

Pig receivers and launchers
Scrapers of various versions from 2" to 60"
Welding tools
Leak sealing plugs
Compression and compensation plugs
T-bends for spheres to pass

ENCE GmbH Moscow representative oil production department

This is one of the most actively developing departments at present time with constantly growing number of projects in this sphere. The specialists of the department can offer the following plants, equipment and separate units:

Oil treatment plants (OPT) for deposits

Technical record of facility intake gas/oil mixture
Phase separation of gas/oil mixture: oil, gas, water
Secondary phase separation of oil-water emulsion: oil, water
Treatment and dehydration of separated gas
Treatment and separated water re-injection
Separated oil dehydration and desalting plants (electrodehydrators)
Gas and oil metering station

Process equipment constituting the oil treatment plant (OTP)

Module-Type Formation pressure maintenance plant

Operating data

Capacity up to 2500 m³/h
Inlet pressure from 0,2 bar
Discharge pressure up to 410 bar

Oil-heating units

Construction:

Designed with intermediate heat transfer agent
Designed with convection heater

Types of heaters:

Spiral coil
Convection type
Serpentine type
Cabin type
"Water bath" type

Flaring systems

Types on process supply:

air supply
steam suppl

Types of constructions:

Ground flare KEGF
Thermal oxidizer flare ZTOF

Types of burners:

standard
combined:
- with standard emissions level
- with reduced emissions level
- with ultra-low emissions level

Drilling rigs

with variable frequency drive
direct current (DC)
electromechanical
chain driven
belt driven

Drilling rigs components and accessories

ENCE GmbH Moscow representative ferrous metal industry department

The department consists of very experienced engineers, specialized in a wide range of metallurgical equipment. The specialist of the department are willing to take part in a number of basic equipment engineering projects, to offer separate units upgrading and whole processing lines on the base of energy-saving and high efficiency principles. Together with the parent company ENCE GmbH we offer services on upgrading or supply of the brand new modern equipment:

Cold rolling mills

Technical data:

Strip gage: 0.3 – 4.0mm
Coil weight: - max 30t
Annual output: max 700.000 t

Tube-rolling mills

The following mills are offered for supply:

Press piercing mills
Automills for the hot rolling of pipes
Mills of continuous lengthwise rolling with two-high stands
Pilger mills for the production of thick-walled pipes
Three-high elongators (skew rolling)
Reducing mills for the diameter reduction of the pipes

A pipe-rolling plant can be supplied with:

Heating furnaces
Reeling and sizing mills
Straightening machines
pipe-cutting and pipe-threading machines

Pipe electric-welding machines

Including:

Continuous tube-forming mills
Continuous hot molding equipment
Mechanical and hydraulic presses for billet forming
Forming machines of rolling mandrel-type and sleeve-type
Pipe electric-welding machines with arc welding under the layer of flux
Reduction mills

Press-forging plants

Forging machine with 4 hammers for section steel production
Open die forging mill
Forging manipulators
Press-forging plants
Special presses
Hydraulic drives

Roll grinding equipment

Technical data:

Diameters of rolls max. 700 mm
Machine length max. 10000 mm
Weight of rolls max. 4500 kg
Continuously adjustable rolls rotating speed
Servo drive
Belt sanders 7,5 kW and 11 kW
Pneumatic belt tension
Belt size 150 x 2500 mm
Steel cutter holder
Grinding machine for the edges of printing rollers
Automatic diameter measurement
Process control system software
Automatic crane loading
Grinding with lubricoolant and filter system or dry grinding with dust removal

Steel strip pickling line

Technical data:

Annual capacity – up to 600 thousand tons in a year
Strip thickness – 1,0-4,0 mm
Strip width – 900-1550 mm
Coil inner diameter - 750 mm
Coil outer diameter – max 2200 mm
Coil weight – up to 30 t
Line speed – max 150 m/min

Hot Galvanizing Line

for steel strip

Technical characteristics:

Strip thickness – 0.3-2.0 mm
Strip width – 600-1650 mm
Coil weight – up to 30 tons
Coil external diameter – up to 2100 mm
Line speed – up to 180 m/min

ENCE GmbH has successfully supplied fast-used units and parts of hot galvanizing line dipping equipment, which are made of stellite, ceramics, 316L stainless steel and other steel:

sink drums (rolls)
correction rolls, stabilizing rolls
journal bearings
bushings and washers of various configurations and designs
furnace rolls, including those with ceramic coating
tempering mill rolls

To improve the coating quality ENCE GmbH representative specialist offer to include special plant for hydrodynamic strip cleaning in the scope of supply of hot galvanizing line, and offer more effective cooling unit.

for Reinforcement Rods, Metal Structures and Railings

Capacity: 10 000… 100000 tons/year
Billet length max. 15000mm

Steel strip polymer coating lines

Technical data:

Strip thickness - 0,2-2.0 mm
Strip width - 600-1500 mm
Coil weight – up to 10 tons
Process speed – up to 200 m/min
Coating types – polyester, epoxy, acrylic, PVC and others.

Slitting-and-Shearing Lines, Combination Lines

Technical data:

Strip width – 500-1600 mm
Strip thickness - 0,3-4,0 mm
Coil weight – up to 20 tons
Strip feed speed– up to 100 m/min

ENCE GmbH Moscow representative non-ferrous metallurgy and energy department

Thermal Ceramics Refractory Materials

Refractory types:

Insulating fiber (plates, fiber, blocks): up to +1600°C
Insulating refractory firebrick: up to +1760°C
Melt-molded refractories: up to +1720°C
Nonwettable refractories max. 1800°C

Application methods:

Casting method
Gunning
Rodding
Hand packing
Wet gunning

Shutoff and Control valves for high temperature and pressure

WOMA High-Pressure pumps

Technical data:

Operating pressure: up to 6500 bar
Flow rate: up to 3070 l/min

High- and super high-pressure units for:

High-pressure water jet equipment
High-pressure transportation
Industrial equipment cleaning
Fireless pipe and nonmetal sheet material cutting
Cinder removal

Test Benches for Pipe, Valve, Reservoir Valve and Critical Block Hydraulic Testing

Technical data:

Operating medium – process water
Pressure source for hydraulic testing is a piston pump unit
Flange connection dimensions: from PN 25 up to PN 1500
Max. possible pressure – 6500 bar

In every department the employees have their own functions or customers groups. The head of the subdivision is aware of the main information and can answer the questions related to his specialization any time as well as distribute the work for quick and effective result.

Our subsidiary in Russia is looking forward to move ahead. It is eager to establish business contacts with new regions and new customers and works purposeful in this direction. In spite of the fact that there are 60 persons in Moscow representative ENCE GmbH at the present moment, the company is enlarging its staff.

Moscow representative ENCE GmbH is willing to consider all possibilities of co-operation with experts from different branches and firms supplying equipment for customers in Russia as well as producers of the equipment related to the Company’s business from different countries.

industry innovations, modernization, energy saving, process environment

At present ENCE GmbH is planning to expand in Russia. Therefore the following vacancies are advertised Manager of oil and gas production and processing equipment and manager of mining equipment. Our representative office will consider all candidates irrespective of their age but the necessary condition is the work experience in this sphere. (You can send your CV to the representative office in Moscow)

Waiting for your comments by fax or E-mail,
Representative ENCE GmbH / Moscow

For more information about company’s representatives in the territory of Russia please visit the related page